DTF Single Transfers - Custom

**If you are needing more than a few sheets, please email us at Transfers@ctsbpro.com for bulk pricing!!**

Direct To Film (DTF) transfers is a printing process that has the ability to create long lasting apparel artwork without splitting or cracking, which can occur when using traditional silkscreen prints. We use a unique printing technology that prints your designs in full color onto a special film with eco-friendly water based ink. We then apply a powdered glue to the back, which is heat cured and ready for instant heat pressing onto your garments or can be stored for later use.

• Full color graphics
• Gradients, special effects, and photo realistic artwork
• Ultra-rich color output
• Extremely versatile, can be applied to nearly any fabric
• Low-temperature application for temperature sensitive fabrics
• Excellent stretchability and durability

Your print will come on a transparent film. Lay the film face up on your garment. Press with firm pressure at 320 degrees for 15 to 20 seconds. Wait 10 to 15 seconds and remove film.  You will need to do a second press at the same temperature and time covering transfer with a teflon sheet or butcher paper.

Please email us at Transfers@ctsbpro.com with questions you may have. We will gladly reach out to you. You may also call us at 336-423-1008.

Quality/resolution of artwork needs to be 300 dpi for a good print. All artwork sent should be sized according to what you need printed. PNG file is required. If artwork has a background, it will be printed with a background. Unless directed by you, no changes will be made to size, color or design.

Additional charges will be added if artwork needs to be resized, color change or design change. Again, this will be discussed and approved by you prior to anything being done. Prices start at $10 and go up depending on what change is needed.